Panasonic Eluga Pulse X APN Settings 2024: Set Up APN and MMS
Looking for steps to set APN on Panasonic Eluga Pulse X? Panasonic Eluga Pulse X is an Android handset developed by Panasonic. In this guide, I'll demonstrate how to configure APN (Access Point Name), internet, hotspot, and MMS settings on Panasonic Eluga Pulse X 2024. These configurations are effective for 2G, 3G, 4G, LTE, VoLTE, and 5G networks. Achieve high-speed internet on Panasonic Eluga Pulse X with any SIM using this process.
What is APN Settings for Panasonic Eluga Pulse X?
APN stands for Access Point Name. To access the internet on Panasonic Eluga Pulse X, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Panasonic Eluga Pulse X APN Settings
How to set APN on Panasonic Eluga Pulse X? To set/configure APN -Access Point Name on your Panasonic Eluga Pulse X, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Panasonic Eluga Pulse X, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Panasonic Eluga Pulse X MMS Settings
How to set MMS on Panasonic Eluga Pulse X? MMS stands for Multimedia Messaging Service. To receive MMS on your Panasonic Eluga Pulse X, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Panasonic Eluga Pulse X, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Panasonic Eluga Pulse X. If you still cannot access the internet after successfully configuring APN on your Panasonic Eluga Pulse X, let us know by leaving a comment below.
