Sony SmartWatch 3 SWR50 APN Settings 2024: Set Up APN and MMS
Want to know how to set APN on Sony SmartWatch 3 SWR50? Sony SmartWatch 3 SWR50 is an Android smartphone designed by Sony. This guide will show you how to set up APN (Access Point Name), internet, hotspot, and MMS settings on Sony SmartWatch 3 SWR50 2024. These settings support 2G, 3G, 4G, LTE, VoLTE, and 5G networks. Follow these steps to access high-speed internet on Sony SmartWatch 3 SWR50 with any SIM.
What is APN Settings for Sony SmartWatch 3 SWR50?
APN stands for Access Point Name. To access the internet on Sony SmartWatch 3 SWR50, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Sony SmartWatch 3 SWR50 APN Settings
How to set APN on Sony SmartWatch 3 SWR50? To set/configure APN -Access Point Name on your Sony SmartWatch 3 SWR50, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Sony SmartWatch 3 SWR50, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Sony SmartWatch 3 SWR50 MMS Settings
How to set MMS on Sony SmartWatch 3 SWR50? MMS stands for Multimedia Messaging Service. To receive MMS on your Sony SmartWatch 3 SWR50, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Sony SmartWatch 3 SWR50, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Sony SmartWatch 3 SWR50. If you still cannot access the internet after successfully configuring APN on your Sony SmartWatch 3 SWR50, let us know by leaving a comment below.
