Ulefone Power Armor 14 APN Settings 2024: Set Up APN and MMS
Are you searching for the way to set up APN on Ulefone Power Armor 14? Ulefone Power Armor 14 is an Android smartphone crafted by Ulefone. In this guide, I will explain how to configure APN (Access Point Name), internet, hotspot settings, and MMS on Ulefone Power Armor 14 2024. These settings will work seamlessly for 2G, 3G, 4G, LTE, VoLTE, and 5G networks. Enjoy high-speed internet on your Ulefone Power Armor 14 with any SIM card using this method.
What is APN Settings for Ulefone Power Armor 14?
APN stands for Access Point Name. To access the internet on Ulefone Power Armor 14, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Ulefone Power Armor 14 APN Settings
How to set APN on Ulefone Power Armor 14? To set/configure APN -Access Point Name on your Ulefone Power Armor 14, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Ulefone Power Armor 14, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Ulefone Power Armor 14 MMS Settings
How to set MMS on Ulefone Power Armor 14? MMS stands for Multimedia Messaging Service. To receive MMS on your Ulefone Power Armor 14, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Ulefone Power Armor 14, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Ulefone Power Armor 14. If you still cannot access the internet after successfully configuring APN on your Ulefone Power Armor 14, let us know by leaving a comment below.
