Ulefone Power Armor 19 APN Settings 2024: Set Up APN and MMS
Trying to find out how to set APN on Ulefone Power Armor 19? Ulefone Power Armor 19 is an Android phone by Ulefone. In this tutorial, I'll explain how to configure APN (Access Point Name), internet, hotspot, and MMS settings on Ulefone Power Armor 19 2024. These settings are suitable for 2G, 3G, 4G, LTE, VoLTE, and 5G networks. Get high-speed internet on Ulefone Power Armor 19 with any SIM by following this guide.
What is APN Settings for Ulefone Power Armor 19?
APN stands for Access Point Name. To access the internet on Ulefone Power Armor 19, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Ulefone Power Armor 19 APN Settings
How to set APN on Ulefone Power Armor 19? To set/configure APN -Access Point Name on your Ulefone Power Armor 19, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Ulefone Power Armor 19, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Ulefone Power Armor 19 MMS Settings
How to set MMS on Ulefone Power Armor 19? MMS stands for Multimedia Messaging Service. To receive MMS on your Ulefone Power Armor 19, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Ulefone Power Armor 19, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Ulefone Power Armor 19. If you still cannot access the internet after successfully configuring APN on your Ulefone Power Armor 19, let us know by leaving a comment below.
