Wiko Ufeel fab APN Settings 2024: Set Up APN and MMS
Are you searching for the way to set up APN on Wiko Ufeel fab? Wiko Ufeel fab is an Android smartphone crafted by Wiko. In this guide, I will explain how to configure APN (Access Point Name), internet, hotspot settings, and MMS on Wiko Ufeel fab 2024. These settings will work seamlessly for 2G, 3G, 4G, LTE, VoLTE, and 5G networks. Enjoy high-speed internet on your Wiko Ufeel fab with any SIM card using this method.
What is APN Settings for Wiko Ufeel fab?
APN stands for Access Point Name. To access the internet on Wiko Ufeel fab, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Wiko Ufeel fab APN Settings
How to set APN on Wiko Ufeel fab? To set/configure APN -Access Point Name on your Wiko Ufeel fab, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Wiko Ufeel fab, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Wiko Ufeel fab MMS Settings
How to set MMS on Wiko Ufeel fab? MMS stands for Multimedia Messaging Service. To receive MMS on your Wiko Ufeel fab, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Wiko Ufeel fab, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Wiko Ufeel fab. If you still cannot access the internet after successfully configuring APN on your Wiko Ufeel fab, let us know by leaving a comment below.
